Milling

GFMS Mikron HSM 400uLP #1

The Mikron HSM 400uLP (MILL S series) is a high performance linear motor 5-Axis machine.  Without ballscrews to hinder performance, the 400uLP is able to maintain precise adherence to the specified tool path even under extremely high feed rates.

Features:

Travel (X,Y,Z): 500 x 240 x 360mm

Direct Drive 5-Axis with Linear Motors

42,000 rpm HSK E40 Spindle​

60 m/min Linear Speed (2362 in/min)​

HSM-400-CO.png

Blum Laser Tool Measurement​

M&H In-Process Touch Probe​

68 Tools​

Integrated into Linear Robotic Cell

GFMS Mikron HSM 400uLP #2

The Mikron HSM 400uLP (MILL S series) is a high performance linear motor 5-Axis machine.  Without ballscrews to hinder performance, the 400uLP is able to maintain precise adherence to the specified tool path even under extremely high feed rates.

Features:

Travel (X,Y,Z): 500 x 240 x 360mm

Direct Drive 5-Axis with Linear Motors

42,000 rpm HSK E40 Spindle​

60 m/min Linear Speed (2362 in/min)​

HSM-400-CO.png

Blum Laser Tool Measurement​

M&H In-Process Touch Probe​

68 Tools​

Integrated into Linear Robotic Cell

GFMS Mikron MILL X 600 U

The machines from the Mikron MILL X series are extremely fast machining centers, highly appreciated in serial production of a variety of precision parts. For optimal absorption of machining and dynamically generated mass energy, the portal design is realized with a polymer concrete base supporting weight optimized and highly stiff cast iron sliding carriages.

Features:

Travel (X,Y,Z): 800 x 600 x 500mm

Direct Drive 5-Axis with Linear Motors

36,000 rpm HSK E50 Spindle

100 m/min Linear Speed (2362 in/min)

mikron-mill-x-600-u_edited.png

Blum Laser Tool Measurement​

M&H In-Process Touch Probe​

120 Tools​

Integrated into Linear Robotic Cell

GFMS Mikron Mill X400U.png

GFMS Mikron MILL X 400 U

The machines from the Mikron MILL X series are extremely fast machining centers, highly appreciated in serial production of a variety of precision parts. For optimal absorption of machining and dynamically generated mass energy, the portal design is realized with a polymer concrete base supporting weight optimized and highly stiff cast iron sliding carriages. 

Features:

Travel (X, Y, Z): 500 x 240 x 360 mm

42,000 rpm HSK-E40 Spindle

Rapid Traverse X, Y, Z 100m/min

68 Tool

Control Unit - Heidenhain

GFMS Mikron MillP 800uST​

The Mikron Mill P 800u ST is a unique machine combining dynamic 5-axis milling with simultaneous turning capability at up to 800rpm. The combination of milling and turning technology in a single machine achieves optimal productivity, accuracy and cost effectiveness. Being able to fully machine components on a single machine eliminates transfer-related part runout and errors and increases finished part quality.  Due to its stable construction and directly drive chilled rotary and tilt axis circular and swiveling axes, the Mikron Mill P 800 U ST can be used for anything from heavy roughing work to precise finishing work.

Mikron-MILL-P-800-U_1_edited.png

800 rpm C-Axis Turning

20,000 rpm HSK T63 with CTS

Travel (X,Y,Z): 800 x 800 x 500mm

Features:

45 m/min Linear Speed

Blum Laser Tool Measurement​

M&H In-Process Touch Probe​

Mikron VCP 800.jpeg

GFMS Mikron VCP 800​

The VCP 800 machining center is designed as a traveling machine with a moving working table. Two linear motions are carried out by the tool and one linear motion by the work piece. The machine column in polymer concrete is the base of this concept. Due to self-rigidity, long term precision accuracy is achieved without special foundation. The moving working table (X-axis) guarantees a good access to the work area. The machine base in polymer concrete carries the two axis unit includes a transversal slide (Y-axis) and the spindle slide for the Z motion. The compact construction of these elements forms the basis for the high geometric accuracy of this machining center.

Features:

Travel (X,Y,Z): 800 x 450 x 450mm

42,000 rpm / HSK 40E spindle

36 Tools

Rigid Rectangular table 1050 x 530 mm