WALTER HELICHECK PLUS

Helicheck Plus

Walter Helicheck Plus

Thanks to the additional 8:1 camera in the HELICHECK PLUS, this CNC measuring machine can also be easily used to capture and measure the smallest geometries on cutting tools. Microgeometries up to 0.1 mm diameter can be measured safely and with high repeatability. HELICHECK PLUS is the right choice to ensure productivity and the quality of modern tool production in a sustainable manner.

Features:

E1 value of (1.4+L/300)µm

Fixed optical systems without rotating axes

Low-vibration, solid granite base for maximum measuring accuracy

Diameter range of 1mm to 150mm

road application range, machine can be used to measure tools, production parts and production equipment all the way to index- able inserts and flat parts.

Helicheck Inspection Report

Diameter Measurement Horizontal

Diameter measurement (Horizontal) backlight camera 1

One dimensional measurement uncertainty (diameter)
Range of measurements (minimal required range Rmin M 1µm)
Tolerance E1(D) = 1.4 µm D[mm]/300.00 µm R = 0.5 µm

Completed by:
Name: Danny Lebel
Date: 7/7/2021

Length Measurement Vertical

Length measurement (Vertical) backlight camera 1

One dimensional measurement uncertainty (length)
Range of measurements (minimal required range Rmin < 1 µm)
Tolerance E1 = 1.4 µm L[mm]/300.00 µm R = 0.5 µm

Completed by:
Name: Danny Lebel
Date: 7/7/2021

Diameter Measurement Horizontal (Camera 2)

Diameter measurement (Horizontal) backlight camera 2

One dimensional measurement uncertainty (diameter)
Range of measurements (minimal required range Rmin < 1 µm)
Tolerance E1(D) = 1.4 µm D[mm]/300.00 µm R = 0.5

Completed by:
Name: Danny Lebel
Date: 7/7/2021

Length Measurement Vertical (Camera 2)

Length measurement (Vertical) backlight camera 2

One dimensional measurement uncertainty (length)
Range of measurements (minimal required range Rmin < 1 µm)
Tolerance E1(L) = 1.4 µm L[mm]/300.00 µm R = 0.5 µm

Completed by:
Name: Danny Lebel
Date: 7/7/2021

Angle Measurement (1)

Angle measurement blacklight camera

Minimal requirement: All repeatings have to be inside tolerance
Clearance-angle main cutting edge “B”
Tolerance t = 000 °
Nominal value a = 008 °
USL; LSL = α±t
Clearance-angle main cutting edge “D”
Tolerance t = 000°
Nominal value β = 012°
USL; LSL = β±t

Completed by:
Name: Danny Lebel
Date: 7/7/2021

Angle Measurement (2)

Angle measurement frontlight camera

Minimal requirement: All repeatings have to be inside tolerance
Rake-angle main cutting edge “E”
Tolerance t = 000°
Nominal value a = 020°
USL; LSL = α±t

Rake-angle main cutting edge “G”
Tolerance t = 000°
Nominal value β = -025 °
USL; LSL = β±t

Completed by:
Name: Danny Lebel
Date: 7/7/2021

Angle Measurement (3)

Angle measurement toplight camera

Minimal requirement: All repeatings have to be inside tolerance
Clearance-angle endface “B”
Tolerance t = 000°
Nominal value a = 020°
USL; LSL = α±t

Clearance-angle endface “H”
Tolerance t = 000°
Nominal value β = 010 °
USL; LSL = β±t

Completed by:
Name: Danny Lebel
Date: 7/7/2021