Space-saving and suitable for the shop floor for use in the measuring laboratory or directly next to the grinding machine. Insert tool, start, inspect, and you’re done. Clear software interface for a simple inspection procedure; Assistant-supporting measuring procedures. Automatic optical edge detection for high accuracy; High-quality camera systems and automatic light controls. Direct data transmission to the grinding machine possible. For instance, as with the software module for all wear and tear measurements.
Positioning Volume (X, Y, Z): 190 x 50 x 55 mm
Measuring and clamping shaft Ø: 2 mm - 40 mm
Color camera: 6.5-times zoom lens focus 2 mm - 12 mm
Working distance 175 mm depth of focus, 0.4 mm - 4.1 mm
Check out the Zoller POM in action!
The ZOLLER pom is the inspection solution for process-related measuring and inspection of drills, milling cutters and counterbores in incident light. Thanks to its compact and universal design, pom can be used in the measuring laboratory, incoming goods controlling, or directly in the grinding shop.
Located in our Nano-Scale Inspection Lab
All of the products produced at Miltera flow through our state of the art inspection laboratory. Located in the core of the building and isolated with airlocks, our laboratory is an ISO Class 5 clean room held to a nominal temperature of 20.00°C +/- 0.25°C and 50.0% +/- 5.0% relative humidity. Particulate is controlled using 2 zones of HEPA filters. Parts enter the inspection lab through our aclimitization chamber which allows for components to reach inspection temperature before entering the room. This laboratory is home to our Zeiss Micura CMM, Zeiss Centermax CMM, and Alicona µCMM.