Miltera's Full
Machine List
Milling
GFMS Mikron MILL X 400 U
The machines from the Mikron MILL X series are extremely fast machining centers, highly appreciated in serial production of a variety of precision parts. For optimal absorption of machining and dynamically generated mass energy, the portal design is realized with a polymer concrete base supporting weight optimized and highly stiff cast iron sliding carriages.
Features:
Travel (X, Y, Z): 500 x 240 x 360 mm
42,000 rpm HSK-E40 Spindle
Rapid Traverse X, Y, Z 100m/min
68 Tool
Control Unit - Heidenhain
GFMS Mikron HSM 400uLP #1
The Mikron HSM 400uLP (MILL S series) is a high performance linear motor 5-Axis machine. Without ballscrews to hinder performance, the 400uLP is able to maintain precise adherence to the specified tool path even under extremely high feed rates.
Features:
Travel (X,Y,Z): 500 x 240 x 360mm
Direct Drive 5-Axis with Linear Motors
42,000 rpm HSK E40 Spindle
60 m/min Linear Speed (2362 in/min)
Blum Laser Tool Measurement
M&H In-Process Touch Probe
68 Tools
Integrated into Linear Robotic Cell
GFMS Mikron HSM 400uLP #2
The Mikron HSM 400uLP (MILL S series) is a high performance linear motor 5-Axis machine. Without ballscrews to hinder performance, the 400uLP is able to maintain precise adherence to the specified tool path even under extremely high feed rates.
Features:
Travel (X,Y,Z): 500 x 240 x 360mm
Direct Drive 5-Axis with Linear Motors
42,000 rpm HSK E40 Spindle
60 m/min Linear Speed (2362 in/min)
Blum Laser Tool Measurement
M&H In-Process Touch Probe
68 Tools
Integrated into Linear Robotic Cell
GFMS Mikron MILL X 600 U
The machines from the Mikron MILL X series are extremely fast machining centers, highly appreciated in serial production of a variety of precision parts. For optimal absorption of machining and dynamically generated mass energy, the portal design is realized with a polymer concrete base supporting weight optimized and highly stiff cast iron sliding carriages.
Features:
Travel (X,Y,Z): 800 x 600 x 500mm
Direct Drive 5-Axis with Linear Motors
36,000 rpm HSK E50 Spindle
100 m/min Linear Speed (2362 in/min)
Blum Laser Tool Measurement
M&H In-Process Touch Probe
120 Tools
Integrated into Linear Robotic Cell
GFMS Mikron MillP 800uST
The Mikron Mill P 800u ST is a unique machine combining dynamic 5-axis milling with simultaneous turning capability at up to 800rpm. The combination of milling and turning technology in a single machine achieves optimal productivity, accuracy and cost effectiveness. Being able to fully machine components on a single machine eliminates transfer-related part runout and errors and increases finished part quality. Due to its stable construction and directly drive chilled rotary and tilt axis circular and swiveling axes, the Mikron Mill P 800 U ST can be used for anything from heavy roughing work to precise finishing work.
Features:
Travel (X,Y,Z): 800 x 800 x 500mm
20,000 rpm HSK T63 with CTS
800 rpm C-Axis Turning
45 m/min Linear Speed
Blum Laser Tool Measurement
M&H In-Process Touch Probe
GFMS Mikron VCP 800
The VCP 800 machining center is designed as a traveling machine with a moving working table. Two linear motions are carried out by the tool and one linear motion by the work piece. The machine column in polymer concrete is the base of this concept. Due to self-rigidity, long term precision accuracy is achieved without special foundation. The moving working table (X-axis) guarantees a good access to the work area. The machine base in polymer concrete carries the two axis unit includes a transversal slide (Y-axis) and the spindle slide for the Z motion. The compact construction of these elements forms the basis for the high geometric accuracy of this machining center.
Features:
Travel (X,Y,Z): 800 x 450 x 450mm
42,000 rpm / HSK 40E spindle
36 Tools
Rigid Rectangular table 1050 x 530 mm
Turning
Nakamura WT150II
The WT-Series turning centers are the most diverse range of dual turret multi-tasking turning centers available today. These versatile machines are used in the medical, electronics and aerospace industries. With upper and lower 24 station turrets, complete families of parts can be machined with minimal setup times. Nakamura-Tome offers standard conversational programming on all multi-tasking models.
Features:
Up to 26kW cutting power available for turning shaft-work with synchronized spindles. (Left spindle motor 15/11kW, Right spindle motor 11/7.5kW)
Driven-Tool Motor Power 5.5/3.7kW, for heavy cutting with small tools.
With upper / lower turret construction, 4-axis machining as well as various other machining combinations possible on either spindle.
With up to 24-tools per turret, 48 tools can be permanently available.
Mazak QTN250II
The QUICK TURN NEXUS 250-II MSY CNC Turning Center with Multi-Tasking capability brings together advanced technology, productivity and value to deliver exceptional performance for shops of all sizes. As an (MSY) configuration, this machine offers the greatest versatility available in the QTN series. The machine features milling and Y-axis capability as well as a second turning spindle to process parts in DONE IN ONE® operations.
Plus, the machine is equipped with the MATRIX NEXUS 2 CNC that features MAZATROL conversational programming and EIA-ISO programming.
Features:
Powerful main turning spindle
Rotary tool milling spindle
Y-axis capability
CNC programmable tailstock
Through-hole chuck packages
Automatic tool eye
Easy integration of bar feeders and gantry robots
Grinding
Anca MX7 Linear #1
The MX Linear range is specifically designed to meet the needs of tool production facilities seeking maximum output while remaining flexible to customer requirements. These machines include new technology linear motors that enable them to achieve even higher levels of accuracy and performance.
Features:
6 Wheel Pack Changer
Fanuc Robotic Loading
Up to 300mm (12") Work Length
Anca MX7 Linear #2
The MX Linear range is specifically designed to meet the needs of tool production facilities seeking maximum output while remaining flexible to customer requirements. These machines include new technology linear motors that enable them to achieve even higher levels of accuracy and performance.
Features:
6 Wheel Pack Changer
Fanuc Robotic Loading
Up to 300mm (12") Work Length
3D Printing
Markforged Mark Two
Print Continuous Carbon Fiber reinforced parts on your desktop – stiff, strong, extremely durable, and capable of replacing machined aluminum. A unibody aluminum chassis and precision-machined components deliver lights-out reliability over thousands of print hours. Print precise parts with best-in-class surface finish thanks to Onyx, Markforged’s extremely versatile micro carbon fiber filled nylon material.
Features:
Printing Process: Continuous Fiber Reinforcement (CFR)
Z Layer Resolution: 100 μm - 200 μm
Printing Media: Composite Base Filaments, Continuous Fibers
Closed Cell Infill with continuous fiber reinforcement
Precision Ground Composite Printing bed
EDM
GFMS CUT 300 SP
The AgieCharmilles CUT 300 SP is the most versatile machine range on the market, capable of cutting 45° cones, and can do this whatever the height of the part. The principle of crossed double guiding of the X, Y, U and V axes independently and of the same dimensions, allows machining to be done with a large taper, thurs widening the scope of possible applications for wire spark erosion.
Features:
Travel (X,Y,Z): 549.9 x 349.8 x 400mm
Workpiece dimensions 1200mm x 700mm x 400mm
GFMS Form P 350
A compact C-axis construction, fixed table and cast iron frame offer stability and force reduction to maintain a precise spark gap between the part and electrode. Regardless of part weight or dielectric volume, the machines deliver consistently high accuracies and surface finishes of Ra 0.1µm. Integrated glass scales preserve repeatability and eliminate the need for recalibration and errors due to backlash and wear.
Features:
Travel (X,Y,Z): 350 × 250 × 300mm
Workpiece dimensions: 700 × 460 × 275mm
GFMS WorkPartner 1+
WorkPartner 1+ is intended for applications in milling machines, grinders, die-sinking EDM, wire EDM and laser machines, and it is just as effective with one-off manufacturing as with series production. The WorkPartner 1+ offers maximum magazine capacity in minimum floor space. Unlike many other solutions on the market, there is no risk of “painting yourself into a corner”
Features:
One, two or three magazine capability gives exceptionally flexible capacity.
The open architecture allows it to interconnect and serve different machines.
Inspection
Alicona Infinite Focus G5 Plus
InfiniteFocus is a highly accurate, fast and flexible optical 3D measurement system. With only one sensor, users verify dimensional accuracy and measure surface roughness of their components. Based on the technology of Focus Variation the range of measurable surfaces is almost unlimited. By means of Vertical Focus Probing, which is an extension of Focus-Variation vertical surfaces are probed laterally as well. Components are traceably measured in high accuracy, with a high vertical resolution and in high repeatability.
Features:
Measurement Principle: non-contact, three dimensional, based on Focus-Variation
Positioning Volume (X, Y, Z): 200 x 200 x 100mm
Flatness Deviation: 1.6 x 1.6mm with 10x objective
Alicona uCMM
The Alicona µCMM is the first purely optical CMM machine used to measure extremely tight tolerances with high accuracy. Combining the advantages of tactile coordinate measuring technology and optical surface measuring technology to measure the dimension, position, shape and roughness of components with only one sensor.
Features:
Measurement Principle: non-contact, three dimensional, based on Focus-Variation
Travel Speed of Axes: Up to 100 mm/s
9 Temperature Sensors, 3 Vibration Sensors
Accuracy:
Multi Measurement = (0.8 + L/600) μm
Single Measurement = (0.15 + L/50) μm
Zeiss Micura CMM
Our ZEISS MICURA is located in our ISO Class 5 clean room held to a nominal temperature of 20.00°C +/- 0.25°C and 50.0% +/- 5.0% relative humidity. Particulate is controlled using 2 zones of HEPA filters. Parts enter the inspection lab through our acclimatization chamber which allows for components to reach inspection temperature before entering the room.
Additionally a workpiece temperature sensor allows compensation of workpiece temperature variation from ambient.
All this combined with careful calibration and this machine has achieved certification to the XENOS CMM standard making it the most accurate CMM in Canada and joins the group of CMMs battling for the title of the most accurate CMM in the world.
Features:
Accuracy: Calibrated to the XENOS standard of 0.3 + L/400
Smallest stylus diameter: 0.3mm
Travel: X, Y, Z (500, 500, 500)
Ceramic guideways and a large bearing base minimize susceptibility to external influences.
Computer-Aided Accuracy (CAA) - Measuring errors due to dynamically induced inertia effects are automatically compensated for greater accuracy.
Zeiss Centermax-1 CMM
Our CenterMax navigator is located in our air-locked, thermally isolated inspection laboratory with 5 temperature averaging sensors maintaining temperature stability of 21 ºC +/- 0.5 ºC. Humidification and dehumidification system maintains humidity levels to 50% RH +/- 5%. Two banks of HEPA filters with low level ducted returns control particulate levels.
Features:
Accuracy: 0.7um + L/1000mm
Temperature stability from +15ºC to +40ºC
Pneumatic vibration insulation
Helix scanning
Dynamic stylus calibration
Zeiss Centermax-2 CMM
Our CenterMax navigator is located in our sub-micron manufacturing lab ready for in-process inspection of our tightest tolerance components.
Features:
Accuracy: 1.0um + L/1000mm
Temperature stability from +15ºC to +40ºC
Pneumatic vibration insulation
Helix scanning
Dynamic stylus calibration
Zeiss GageMax CMM
Our ZEISS GageMax Shop Floor CMM is integrated directly into our robotic production cell for un-manned 24/7 production monitoring and optimization.
Features:
Travel (X,Y,Z): 750 x 500 x 500mm
Acuracy: 1.9 + L/300 µm
Three-sided loading and operation
Temperature stability from +15 ºC to +40 ºC
Compact dimensions, large measuring space
Movable with a forklift
Ram made of temperature-stable carbon-fiber
Includes stylus rack with 4 slots
Walter Helicheck Plus
Thanks to the additional 8:1 camera in the HELICHECK PLUS, this CNC measuring machine can also be easily used to capture and measure the smallest geometries on cutting tools. Microgeometries up to 0.1 mm diameter can be measured safely and with high repeatability. HELICHECK PLUS is the right choice to ensure productivity and the quality of modern tool production in a sustainable manner.
Features:
E1 value of (1.4+L/300)µm
Fixed optical systems without rotating axes
Low-vibration, solid granite base for maximum measuring accuracy
Diameter range of 1mm to 150mm
road application range, machine can be used to measure tools, production parts and production equipment all the way to index- able inserts and flat parts.
Zoller pom
Space-saving and suitable for the shop floor for use in the measuring laboratory or directly next to the grinding machine. Insert tool, start, inspect, and you’re done. Clear software interface for a simple inspection procedure; Assistant-supporting measuring procedures. Automatic optical edge detection for high accuracy; High-quality camera systems and automatic light controls. Direct data transmission to the grinding machine possible. For instance, as with the software module for all wear and tear measurements.
Features:
Positioning Volume (X, Y, Z): 190 x 50 x 55 mm
Measuring and clamping shaft Ø: 2 mm - 40 mm
Color camera: 6.5-times zoom lens focus 2 mm - 12 mm
Working distance 175 mm depth of focus, 0.4 mm - 4.1 mm
